How Often do I need an certified inspection?

Inspection responsibility and frequency varies by equipment: Extinguishers: Monthly (trained employee or certified technician), Bi-annually (trained employee or certified technician), Annually (only a certified technician). Kitchen System: Monthly (trained employee or certified technician), Bi-annually (only a certified technician), Annually (only a certified technician). Sprinkler System: Monthly (trained employee or certified technician), Bi-annually (trained employee or certified technician), Annually (only a certified technician). Alarm System: Monthly (trained employee or certified technician), Bi-annually (trained employee or certified technician), Annually (only a certified technician). Emergency Lights: Monthly (trained employee or certified technician), Bi-annually (trained employee or certified technician), Annually (only a certified technician).

Can you help us pass fire marshal inspections?

Absolutely. Cliffs Fire conducts pre-inspection assessments to identify and address potential violations before your official fire marshal inspection. We ensure all your fire protection systems meet current codes and are properly documented, significantly improving your chances of passing inspection on the first visit.

Frequently Asked Questions

How Often do I need a certified inspection?

YOUR EQUIPMENT	MONTHLY	BI-ANNUALLY	ANNUALLY
EXTINGUISHERS	Trained Employee or Certified Technician	Trained Employee or Certified Technician	Only a Certified Technician
KITCHEN SYSTEM	Trained Employee or Certified Technician	Only a Certified Technician	Only a Certified Technician
SPRINKLER SYSTEM	Trained Employee or Certified Technician	Trained Employee or Certified Technician	Only a Certified Technician
ALARM SYSTEM	Trained Employee or Certified Technician	Trained Employee or Certified Technician	Only a Certified Technician
EMERGENCY LIGHTS	Trained Employee or Certified Technician	Trained Employee or Certified Technician	Only a Certified Technician

Why do I need a certified inspection?

There are 3 primary reasons why is is important to have your business' life safety equipment inspected by a certified technician:

It is required by local and national codes. These requirements are enforced by your local fire marshall by conducting drop-in inspections which could result in fines for being out of compliance.
It is the best way to ensure that you are prepared to protect your employees, patrons, and assets should a fire emergency occur.
If your business files an insurance claim after a fire emergency, payout could be denied if the certification of your life safety equipment has expired.

How often do I need a certified inspection?

Kitchen Suppression System: Every 6 Months
Fire Extinguishers: Annually
Fire Alarm: Annually
Fire Sprinkler System: Annually
Exit & Emergency Lighting: Annually

How much does an inspection cost?

The cost of your inspection will vary based on the life safety equipment you have on site and the condition it is in. The fastest way to get an accurate estimate is to call the office or request a quote

Can I bring my fire extinguishers to you for inspection?

Absolutely!
We offer curb-side service Monday through Friday from 8:00 AM to 5:00 PM, No appointment is necessary.

What does a fire protection company do?

A fire protection company installs, inspects, and maintains fire safety systems in commercial buildings. This includes fire sprinkler systems, fire alarm systems, fire extinguishers, emergency lighting, and specialized suppression systems like kitchen fire suppression and clean agent systems. Regular inspections and maintenance ensure your systems remain compliant with fire codes and ready to protect your property and occupants.

How often should fire protection systems be inspected?

Most fire protection systems require annual inspections to remain compliant with fire safety codes. However, specific requirements vary by system: fire sprinklers need quarterly and annual inspections, fire alarms require semi-annual and annual testing, and fire extinguishers need monthly checks and annual professional inspections. Commercial kitchens with suppression systems require inspections every six months.

What fire protection systems are required in commercial buildings?

Commercial building fire protection requirements depend on building size, occupancy type, and local codes. Most commercial buildings in the Atlanta area require fire alarm systems, fire extinguishers, emergency exit lighting, and fire sprinkler systems depending on building height and square footage. Specialized facilities like restaurants need kitchen fire suppression systems, while data centers may require clean agent suppression.

How much does commercial fire protection cost?

Commercial fire protection costs vary based on building size, system type, and specific requirements. Installation of fire sprinkler systems typically ranges from $1-$2 per square foot for new construction, while fire alarm systems depend on building complexity and the number of detection points needed. Annual inspection and maintenance costs are significantly lower than installation costs and help prevent costly violations or system failures.

What areas does Cliffs Fire serve?

Cliffs Fire provides commercial fire protection services throughout the Atlanta metropolitan area, including Marietta, Roswell, Alpharetta, Johns Creek, Kennesaw, Acworth, Woodstock, Canton, and Smyrna. We also serve the Athens, Georgia area for businesses needing fire protection installation, inspection, and maintenance services.

Do you provide emergency fire protection services?

Yes, Cliffs Fire offers emergency repair services for fire protection systems. If your fire sprinkler system fails, your fire alarm malfunctions, or you experience any fire safety system emergency, our team responds quickly to restore your protection and keep your building compliant with safety codes.

Are fire sprinklers required in my Atlanta commercial building?

Fire sprinkler requirements in Atlanta depend on several factors businesses including building height, square footage, and occupancy classification. Generally, buildings over 5,000 square feet or taller than three stories require fire sprinkler systems. Specific occupancies like hotels, hospitals, and schools have additional requirements regardless of size.

How do I know if my building is up to code?

The best way to ensure your building meets current fire safety codes is to schedule a professional fire protection inspection. Cliffs Fire evaluates your existing systems against current Atlanta and Georgia fire codes, identifies any deficiencies, and provides recommendations to bring your building into compliance.

What happens if I don't maintain my fire protection systems?

Failing to maintain fire protection systems can result in serious consequences, including fire code violations, fines from the fire marshal, increased insurance premiums, and, most critically, system failure during an actual fire emergency. Regular maintenance is not only legally required but essential for protecting your property and occupants.

How long does fire protection system installation take?

Installation timelines vary by system type and building size. Fire alarm systems in smaller buildings may take 1-2 days, while complete fire sprinkler system installation can take several weeks, depending on building complexity. We work with your schedule to minimize disruption to your business operations.

Do you work with new construction or only existing buildings?

Cliffs Fire works with both new construction projects and existing commercial buildings. For new construction, we collaborate with contractors and architects from the design phase through installation. For existing buildings, we provide retrofitting, upgrades, inspections, and ongoing maintenance services.

What type of fire suppression system does my restaurant need?

Commercial kitchens in Atlanta require UL-300-compliant kitchen fire suppression systems installed over cooking equipment. These systems use wet chemical agents specifically designed to suppress grease fires. The system must be professionally installed, inspected every six months, and integrated with your kitchen exhaust hood and gas shutoff.

Can you service fire protection systems installed by other companies?

Yes, Cliffs Fire can inspect, maintain, and repair fire protection systems regardless of who originally installed them. We work with all major manufacturers and can ensure your existing systems remain compliant and fully functional through regular professional service.